Bitarel Jet-Е Bitumen Polymer Tape
ТS BY 690590146.008-2014
Purpose: BITAREL JET-Е bitumen polymer tape is designed to prevent destruction of asphalt concrete pavement joints between the newly laid hot asphalt concrete and adjacent asphalt coating, curb stones, drainage chutes, wells, metal manholes, grills, tram ways, etc.
How to use: before applying the tape, the surface must be cleared of any dust, dirt, debris and oils. Use compressed air if the surface had any water or ice on it. Before laying out the hot asphalt mix, unwind the roll of tape along the work surface, remove the protective antiadhesive film (paper), apply the adhesive side of the tape to the surface on the required level and press down firmly, remove excess tape if necessary. Adjacent strips of tape must be placed edge-to-edge. To ensure that the tape sticks, use BITAREL bitumen primer before applying the tape. If the tape is applied at a temperature under +10°С, drums (boxes) of tape must be kept in a room at +10°С to +25°С for at least 3 hours.
Dimensions: 40х5, 50х5, 40х10, 50х10. Other sizes can be produced upon request.
Packaging: supplied in rolls up to 10 m long, packed in cardboard drums or boxes.
|No||Item||Standard for the adhesive coat of BITAREL JET tape|
|1||Softening point (Ring and Ball method), °С, no less than||80|
|2||Depth of needle penetration at 25ºС, 0.1 mm, no more than||50|
|3||Fraas brittle point, °С, no more than||-15|
|4||Elasticity, %, no less than||50|