Bitarel Waterproofing Sealant
TS BY 690590146.016-2016
- anticorrosion treatment and protection of metal surfaces, including pipes and car bodies;
- waterproofing treatment of concrete, wooden building structures (foundations, cellars, piles).
How to use: before applying the sealant, dry and clean the surface. Mix the sealant thoroughly. If necessary, dilute the solvent to the desired consistency. The sealant should be applied coat by coat with a brush or a spatula, or poured on and spread. Each next coat should be applied only after the previous one has dried. It is recommended to apply two coats. Temperature range should be -20°С to +40°С. If the ambient temperature is below 0°С, the sealant must be kept indoors at room temperature for at least 24 hours.
Average consumption: 0.8-1.1 kg/m² per coat (sealant consumption depends on the number of coats applied).
Packaging: the sealant is supplied in 10, 20 or 50 kg sealed metal containers.
|No||Item||Standard for the type|
|1||Mass fraction of nonvolatile substances, %, no less than||65|
|2||Conditional viscosity, s, no less than||10|
|3||Drying time to degree 2, h, no more than||24|
|4||Strength of adhesion to base, MPa, no less than||0.1 with concrete
0.1 with metal
|5||Shear strength of the adhesive joint, kN/m, no less than||2.0|
|6||Water absorption over 24 h, % by weight, no more than||1.0|
|7||Curvature radius of 5.0±0.2 mm at –5°С||No cracks|